Intended use This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, Your Black & Decker strimmer has been designed for trimming or lack of experience and knowledge, unless they have been and finishing lawn edges and to cut grass in confined spaces.
Page 6
Chargers Move slowly when using the tool. Be aware that freshly cut Use your Black & Decker charger only to charge the grass is damp and slippery. battery in the tool with which it was supplied. Other Do not work on steep slopes. Work across the face of ...
Page 7
Assembly Feed 2 cm of cutting line into one of the holes (33) in the spool as shown (fig. G). Warning! Before assembly, remove the battery from the tool. Bend the cutting line and anchor it in the L-shaped slot (34). ...
Adjusting the height (fig. J) Gently swing the trimmer from side to side as shown in fig. L. When cutting long grass, work in stages from the top. The telescopic shaft (36) allows you to set the tool to a ...
Remove the spool and unwind the cutting line, then wind it on neatly again as described above. Replace the spool as Technical data instructed. GLC2500 Voltage Spool is jammed No-load speed 6,800 Keep the tabs depressed and remove the spool cover ...
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can GLC2500 check the location of your nearest authorised repair agent by Black & Decker declares that these products conform to: contacting your local Black &...