Specifications; Symbols; Intended Use; Noise - Makita TM3010C Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Oscillation per minute
Oscillation angle, left/right
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together
material!
In observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.

Intended use

The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.

Noise

The typical A-weighted
according to EN60745:
Work mode: Sanding
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model
Overall length
without dust extraction attachment
with dust extraction attachment
Safety class
with household
of the
on Waste Electric
Equipment
environmentally compatible
noise level determined
) : 80 dB (A)
pA
END201-7
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with segment saw blade
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
waste
Work mode: Scraping
European
Sound pressure level (L
and
Uncertainty (K) : 3 dB (A)
and its
The noise level under working may exceed 80 dB (A).
Vibration
The vibration
ENE080-1
determined according to EN60745:
Work mode : sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting with plunge cut saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
Work mode : cutting with segment saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : scraping
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2
TM3010C
-1
6,000 - 20,000 (min )
1.6 (3.2 total)
283 mm
1.6 kg
1.7 kg
/II
) : 80 dB (A)
pA
) : 79 dB (A)
pA
) : 82 dB (A)
pA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s or less
h
2
2
) : 6.5 m/s
h
2
2
) : 2.5 m/s
h
2
2
) : 5.0 m/s
h
2
ENG900-1
vector sum)