Table of Contents
Advertisement
2
PREPARATION
@$ AV connection
We recommend
that you use an
AV-cable (sold separately) as
indicated. You can get a higher
quality of picture and sound
during playback.
CONNECTIONS
1
Disconnect theantennaleadfrom
theTV
antenna terminal.
Antenna
~%=
11~11
2
Make connections
0 to@ shown in the
illustration.
Tv
Antenna
Switching the VCR power on/standby
Power is switched onloff by pressing the (!)/1
button on the remote control or on the VCR.
VCR display
Standby
mode (0)
Only the clock is displayed.
Power on mode(1)
The clock and the programme
position
are
displayed.
Saving energy (ECO mode)
The ECO mode reduces the electricity
consumption
by turning off the VCR display
and other components
while the VCR is in
standby mode.
To set the ECO mode
1
Press the 0/1 button to turn the VCR
standby mode.
2 Press and hold the
(!)/1
button for more than
3 seconds.
The ENERGY SAVER indicator comes
green. And nothing is displayed on the
VCR display.
E2Ez
To cancel the ECO mode
Press the 0/1 button to turn the VCR on.
A
When a timer recording is programmed,
the
ECO mode cannot be set.
When watching TV, do not set the ECO
mode. If the ECO mode is set, the aerial
output from the VCR will deteriorate giving
very poor TV reception.
Advertisement
Table of Contents
