Table of Contents
Advertisement
TIMER RECORDING PROGRAMMING
You can set up to 6 programme to be
recorded upon a period of up to 1 year.
Examp/e:
Programme position: 02
Date: 25 December
On time (start): 21:30
Off
time (end) 23:15
1
~re.sst,e
tJRW
button.
2
Using the numeric (0-9)
buttons, .setthe
programme
position number (e.g. "02")
IllElm
Everyday/Weekly recording
Press the CH (+) button repeatedly to select:
Ed: for everday recording
WK: for weekly recording (the same
programme
every week)
3
Set the date (e.g. 25 12)
If you entered
a wrong
number,
press the
CLEAR button to delete it, then enter the
correct number.
4
5
6
Ilmlm
Set the recording on times
(e.g. 21 30).
Set the recording off times
(e.g. 23 15).
When all the settings are as desired,
press the OK button.
You can programme another recording by
repeating steps 2 to 6.
Insert a video cassette with
erasure-prevention
tab.
Make sure the tape is longer than the total
recording time.
Press the 0/1 button.
The timer indicator (~) will light on the
VCR display and the VCR goes into
timer recording standby mode.
Confirmation
1
2
Press the PROG button repeatedly.
"PR --
---–"
will be displayed first if
less than 6 recordings have been
programmed.
The settings (programme
position and
date) for the programmed
recordings are
displayed in sequence.
When the settings you want to confirm are
displayed, press the CH (-) button.
The date will change to the on time then
to the off time.
Canceling
1
When the settings you want tocancet
are
displayed, press the
PROG
button.
z
Press the CLEAR button.
The VCR will automatically
return to the
clock (counter) display.
To correct a programmed
timer recording, first
cancel it, then reprogrammed it as desired.
Notes on timer recording
The (D) indicator will flash if no video
cassette is loaded when going into timer
standby mode.
The (D) indicator will flash and the video
cassette is ejected
if a video cassette with
no erasure-prevention
tab is loaded.
Even if a timer recording has been preset,
the VCR can be used as usual up to the
programmed
start time. When finished
using the VCR, do not forget to return it to
timer recording standby mode.
Programme priority
If several timer recordings have overlapping
recordirm time, the recording with the earliest
start tire; will be recorded fi&t, until the end.
1900
20:00
21:00
22:00
23:00
,
,
,
,
I
Eiiimq
These portions will not be recorded
4
E
ADVANCED OPERATION
o
c
P
o record from an external
rnurce(AUDIOIVIDEO IN on the
!ar panel use)
t step2,
ress the INPUT button.
"L1" is displayed instead of
the programme position
number.
12
Advertisement
Table of Contents
