D-Link DIR-620 User Manual page 30

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
6. In the opened Wireless Network Connection window, select the wireless network DIR-
620 and click the Connect button.
7. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the Security key field and click the OK button.
8. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 15. The list of available networks.
Page 30 of 225
Installation and Connection