D-Link DIR-620 User Manual page 158

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication type is
selected, the following fields are available:
Parameter
Encryption Key PSK
WPA Encryption
When you have configured the parameters, click the Apply button.
In addition, when the Enable client checkbox is selected, the list of available wireless networks is
displayed on the page.
To view the latest data on the available wireless networks, click the Search button.
To connect to a wireless network from the list, select the needed network. Upon that the relevant
values are automatically inserted in the SSID, BSSID, and Network Authentication fields.
For the Open authentication type with no encryption, click the Apply button.
For the Open authentication type with encryption and the Shared authentication type, select a
needed value from the Default Key ID drop-down list. If needed, select the Encryption Key
WEP as HEX checkbox to set a hexadecimal number as a key for encryption. Then select a needed
value in the WEP key length drop-down list, fill in 4 Encryption Key WEP fields, and click the
Apply button.
For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in
the Encryption Key PSK field and click the Apply button.
After clicking the Apply button, the wireless channel of DIR-620 will switch to the channel of the
wireless access point to which you have connected.
If the router is connected to the selected network successfully, the green indicator appears to the
right of the network's SSID in the table.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the WiFiClient interface.
A key for WPA encryption. The key can contain digits and/or Latin
characters.
An encryption method: TKIP, AES, or TKIP+AES.
Page 158 of 225
Configuring via Web-based Interface
Description