D-Link DIR-620 User Manual page 185

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
You can specify the following parameters:
Parameter
MAC address
Action
Activate
After specifying the needed parameters, click the Apply button.
To edit a rule for filtering, click the link to the relevant rule. On the opened page, change the needed
parameters and click the Apply button.
To remove a rule, select the checkbox located to the left of the relevant line in the table and click
the Delete button. Also you can remove a rule on the editing page.
Figure 143. The page for adding a rule for the MAC filter.
The MAC address of a device from the router's LAN. You can enter
the MAC address of a device connected to the router's LAN at the
moment. To do this, select the relevant device from the drop-down
list (the field will be filled in automatically).
Select an action for the rule.
Deny: Blocks access to the router's network for the device with the
specified MAC address.
Allow: Allows access to the router's network and to the Internet for
the device with the specified MAC address when the rules on the
Firewall / IP filters page block access for this device.
If the checkbox is selected, the rule is enabled. Deselect the
checkbox to disable the rule.
Page 185 of 225
Configuring via Web-based Interface
Description