Maintenance - Makita 5402-A Instruction Manual

For bevel work
Loosen the wing nuts on the bevel scale
plate on the front of the base. Set for de-
sired angle (0
-
45') by tilting accordingly,
then retighten the wing nuts firmly.
Fig. 9
MAINTENANCE
CAUT ION :
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection ,and maintenance.
Carbon brushes
Replace carbon brushes when they wear
down to about 6 mm (1/4")
or
sparking
will occur. Both brushes should be changed
a t
the same time. Use only Makita-recom-
mended carbon brushes.
U
6 mm (1 /4")
I
Fig. 1(
Any other maintenance should be performed by an authorized service representative.
8