Advertisement
CAUTION:
Always be sure that the tool
i s
switched off and unplugged before removing or installing
the blade.
Removing
or
installing
saw
blade
To
remove the blade, press the shaft lock
so
that the blade cannot revolve and use
the wrench to loosen the hex bolt counter-
clockwise.
Then remove the hex bolt, outer flange and
the blade.
To install the blade, follow the removal
procedure in reverse.
BE SURE TO TIGHTEN THE HEX BOLT
SECU
R
E LY.
Fig. 8
i
P
Fig.
CAUTION:
0
Be sure the blade
i s
installed with teeth pointing up
a t
the front of the tool.
Use only the Makita wrench to install or remove the blade.
Adjusting depth of cut
Loosen the lever on the depth guide and
move the base up or down.
At the desired depth of cut, secure the base
by tightening the lever.
Lever
Fig.
10
CAUTION :
Use
a
shallow depth of cut when cutting thin workpiece for cleaner, safer cuts.
0
After adjusting the depth of cut, always tighten the lever securely.
9
Advertisement
