Advertisement
MAINTENANCE
CAUTION
:
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection and maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down
to about 6 mm (1/4") or less.
Keep the
brushes clean and free to slip in the holders.
Both brushes should be changed
a t
the
same time. Use only Makita carbon brushes.
Use a screwdriver to remove the brush
holder cap as shown in the figure.
6mm(1/4")
I
Fig.
1 1
Fig. 11
Take out the worn brush, insert the new
one and secure the brush holder cap.
1
Fig. 12
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance and
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
8
Advertisement
