Chapter 2
[4]
[2]
19) Connect the connector [1] of the environment switch unit to J483 of the
AC driver PCB.
- 1 reuse band [2]
- 1 wire saddles [3]
- 1 edge saddles [4]
[1]
[2]
[3]
[4]
20) Install the lower rear cover.
21) Install the upper rear cover.
22) Connect the lattice connector to the host machine.
23) Connect the host machine's power plug to the outlet, and then turn ON
the main power switch.
24) Turn on the environment heater switch.
25) Install the environment heater switch cover.
2-26
[3]
[1]
F-2-102
F-2-103
2.9 Installing the Cassette Heater
2.9.1 Checking Parts to Install
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to have the following parts ready because each part of the Cassette
heater unit is supplied as Service Parts.
[1]
[3]
[4]
No.
Name
[1]
Cassette heater
[2]
Heater cover
[3]
Screw (Binding; M4X6)
[4]
Environment switch unit
[5]
AC driver PCB
2.9.2 Turning OFF the Power of the Host Machine
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.
2.9.3 Installation Procedure (Cassette Heater Unit)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1. Installation to the host machine's cassette
1) Pull out cassette 1 and 2.
2) Remove the claw [1] in the direction of the arrow [A] using a flat-blade
screwdriver, and move the connector cover [2] in the direction of the ar-
row [B] to remove.
[2]
[5]
[5]
F-2-104
T-2-4
Part No.
Qty.
FM3-3772-000
1pc.
FC5-6899-000
1pc.
XB1-2400-607
1pc.
FM3-7052-000
1pc.
FM3-5085-000
1pc.
0019-4539
0019-4548
0019-4549