Developing Assembly; Before Removing The Developing Assembly; Removing The Developing Assembly - Canon iR3245 Series Service Manual

6) Remove the bushing unit [2] from the sub hopper [1].
7) Disconnect the connector [1].
8) Remove the sub hopper [1] from the bottom.

7.12.5 Developing Assembly

7.12.5.1 Before Removing the Developing Assembly

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the front cover unit. (page 10-17)Reference[Removing the
Front Cover Unit]
2) Remove the waste toner container. (page 7-24)Reference[Removing the
Waste Toner Container]

7.12.5.2 Removing the Developing Assembly

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the screw [1].
F-7-33
F-7-34
F-7-35
F-7-36
2) Shift the locking lever [1] to the left to release the pressure of the devel-
oping assembly.
3) Slightly pull out the developing assembly [1] toward the front to discon-
nect the connector [2].
4) Remove the developing assembly [1].
0018-9799
0018-9800
Be sure to hold the developing assembly as shown in the figure.
Chapter 7
F-7-37
F-7-38
F-7-39
7-21