Specifications; Ec Declaration Of Conformity - Makita HP2050 Instruction Manual

ENGLISH

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Model
Speed
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
HP2050/HP2050F
High
20 mm
8 mm
25 mm
0 - 2,900
0 - 58,000
362 mm
2.5 kg
END201-5
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 3 m/s
Work mode : drilling into metal
Vibration emission (a
its
Uncertainty (K) : 1.5 m/s

EC Declaration of Conformity

We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
ENE039-1
2-Speed Hammer Drill
Model No./ Type: HP2050,HP2050F,HP2051,HP2051F
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
ENF002-1
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
ENG102-2
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
2
HP2051/HP2051F
Low High
----- 20 mm
13 mm 8 mm
40 mm 25 mm
0 - 1,200 0 - 2,900
0 - 24,000 0 - 58,000
/II
) : 97 dB(A)
pA
) : 108 dB(A)
WA
Wear ear protection
total value (tri-axial
) : 13 m/s
h,ID
2
) : 2.5 m/s
h,D
2
Corporation as the
Low
-----
13 mm
40 mm
0 - 1,200
0 - 24,000
360 mm
2.5 kg
ENG203-2
vector sum)
2
ENG302-2
2
or less
ENH101-12
responsible