Tv System - Panasonic SC-RT30 Operating Instructions Manual

Resetting channel setting
Automatic setting
You can restart auto channel setting if the channel reception setting
(Setup Guide ➡ 6) fails for some reason.
After performing steps 1-4 (➡ 39)
5
Press [3, 4] to select "Auto-Setup
Restart" or "Download from TV" and
press [ENTER].
The confirmation screen appears.
Select "Download from TV" when you connect the unit to a
Q Link-compatible TV with a fully wired 21-pin Scart cable.
(Programme positions are downloaded from the TV and
copied through this convenient function.)
6
Press [2, 1] to select "Yes" and
press [ENTER].
≥If the country setting menu appears on the television
Press [3, 4, 2, 1] to select the country and press
[ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [X CH] and [CH W] on the main unit until the
Country setting screen appears.
≥All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
List of TV Reception Channels
SYSTEM
CCIR
BG Standard
E2–E12
(BGH)
East
DK Europe
R1–R12
(DKK1)
South
I Africa
(PAL-I)
RQT8728
40
VHF UHF CATV
CH S01–S05,
CH CH
M1–M10, U1–
E21–E69
U10, S21–S41
CH CH 44 MHz–470
CH 21–69
MHz
CH
CH 21–68
4–13

TV System

Refer to the control reference on page 35.
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others" and
press [ENTER].
3
Press [3, 4] to select "Setup" and
press [ENTER].
4
Press [3, 4] to select "Connection"
and press [1].
5
Press [3, 4] to select "TV System"
and press [ENTER].
6
Press [3, 4] to select the TV system
and press [ENTER].
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
≥PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are played
as PAL 60.
–Select to record television programmes and PAL input from
other equipment.
≥NTSC
–Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
The confirmation screen appears.
7
Press [2, 1] to select "Yes" and press
[ENTER].
To return to the previous screen
–
Press [RETURN].
To exit the screen
Press [RETURN] several times.
∫ To change the setting all at once (PAL,.NTSC)
While stopped, press and hold [∫] and [< OPEN/CLOSE] on the
main unit at the same time for about 5 seconds.
TV System
PAL
NTSC
SELECT
ENTER
RETURN