Functions Window; Status Message - Panasonic SC-RT30 Operating Instructions Manual

Using on-screen menus/FUNCTIONS window and Status message
Refer to the control reference on page 21.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
!"#
On Off
§
Progressive (➡ 50)
Select "On" to enable progressive output.
Select "Off" if the picture is stretched horizontally.
§
Transfer [When "Progressive" (➡ above) is set to "On".]
Select the method of conversion for progressive output to suit
the type of title being played (➡ 50, Film and video).
When the output signal is PAL
≥Auto:
Automatically detects the film and video
content, and appropriately converts it.
≥Video:
Select when using "Auto", and the content is
distorted.
≥Film:
Select this if the edges of
the film content appear
jagged or rough when
"Auto" is selected.
However, if the video
content is distorted as
shown in the illustration to the right, then select
"Auto".
≥When the tray is opened, the setting will return to "Auto".
When the output signal is NTSC
≥Auto1
Automatically detects the film and video
(normal): content, and appropriately converts it.
≥Auto2:
In addition to "Auto1", automatically detects
film contents with different frame rates and
appropriately converts it.
≥Video:
Select when using "Auto1" or "Auto2", and the
content is distorted.
AV-in NR (Only when AV1, AV2 or AV3 is selected)
Reduces video tape noise while copying.
≥Automatic: Noise reduction only works on picture input from
a video tape.
≥On:
Noise reduction works for input video.
≥Off:
Noise reduction is off. You can record the input
signal as it is.
§
Only when you have set "Progressive" to "On" in the Setup menu
(Setup Guide ➡ 7).
Sound menu—Change the sound effect
Dialog Enhancer
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [DVD-A]
[-RW‹VR›] and DivX
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialogue
easier to hear.
Other menu—Change the display position
Position
1–5: The higher the setting the lower the on-screen menu
moves.
RQT8728
22

FUNCTIONS window

By using the FUNCTIONS window you may access the main
functions quickly and easily.
Preparation
≥Press [THEATER] to switch the remote control to operate this unit.
≥Press [DVD] to select the DVD drive.
1
While stopped
Press [FUNCTIONS].
Functions displayed depend on the type of disc.
FUNCTIONS
Cartridge Protection Off
DVD-RAM Disc Protection Off
Playback
Recording
Delete
To Others
ENTER
RETURN
2
Press [3, 4] to select an item and
press [ENTER].
≥If you select "To Others" and press [ENTER], the following
screen appears. Press [3, 4] to select an item and press
[ENTER].
FUNCTIONS
Cartridge Protection Off
DVD-RAM Disc Protection Off
ShowView Record
Playback
Playlists
Recording
Flexible Rec
Delete
DV Auto Rec
Setup
To Others DVD Management
ENTER
RETURN
≥If you press [RETURN], you can return to the previous
screen.
To exit the FUNCTIONS window
Press [FUNCTIONS].

Status message

Status messages appear on the television during operation to show
the condition of the unit.
Preparation
≥Press [THEATER] to switch the remote control to operate this unit.
≥Press [DVD] to select the DVD drive.
Press [STATUS].
The display changes each time you press the button.
Type of disc
The remaining time appears here while
DVD-RAM
stopped.
REC
Recording or play status/input channel
PLAY
TV audio type being received (➡ below)
STEREO
Selected audio type
L R
Available recording time and
Date and time
recording mode
Remain
12:34:50 7. 5.
T12 0:01.23 SP
Title number and elapsed
time during play/
Recording mode
No display
≥TV audio type
STEREO:Stereo broadcast
M 1/M 2:Bilingual dual-sound broadcast
M 1: Monaural broadcast
1:45 SP
T12 0:12.34 SP
Title number and elapsed
time during recording/
Recording mode