Panasonic SC-RT30 Operating Instructions Manual page 37

Tabs
Picture Comb Filter
Select the picture sharpness when recording.
The setting is fixed with "On" if you set "TV System" to "NTSC"
(➡ below).
Still Mode
Select the type of picture shown when you pause play
(➡ 50, Frames and fields).
Dynamic Range Compression [DVD-V] (Dolby Digital only)
Sound
Change the dynamic range for late night viewing.
Bilingual Audio Selection
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select whether to record the main or secondary audio type when
recording to a disc.
Audio Mode for DV Input
You can select the kind of audio when recording from the unit's
DV IN terminal (➡ 28).
Speaker (➡ 38)
Adjust the speaker level or set the delay time for your center and
surround speakers.
Display Language
Choose the language for these menus and on-screen messages.
On-Screen Messages
Choose whether to show status messages automatically.
Grey Background
Select "Off" if you do not want to have the unit show the grey
background when tuner reception is weak.
FL Display
Changes the brightness of the unit's display.
This setting is fixed with "Automatic" if you set "Power Save"
(➡ 38) to "On".
TV Aspect (Setup Guide ➡ 6)
Connection
Progressive (Setup Guide ➡ 7)
This setting is fixed with "Off" if you set "AV1 Output" to "RGB 1
(without component)" or "RGB 2 (without component)".
TV System (➡ 40)
AV1 Output
Selects the output from the AV1 terminal.
Select "RGB 1 (without component)" or "RGB 2 (without
component)" for RGB output.
Select "Video (with component)" or "S Video (with component)"
for component output (progressive output).
Set according to the signal and terminal of the connected TV.
When a decoder is connected, do not set to "RGB 1 (without
component)".
AV2 Settings
Set to match the connected equipment.
≥Press [ENTER] to show the following settings.
AV2 Input
This setting is according to the output signal of the
connected equipment.
AV2 Connection
This setting is fixed with "Ext" if you set "TV System" to
"NTSC" (➡ above).
Ext Link
This setting cannot be made when the "TV System" is set to
"NTSC" (➡ above).
Menus Options (Underlined items are the factory presets.)
≥On: Pictures become clear and vivid. Normally, use this setting.
≥Off: Select it when recording noisy pictures.
≥Automatic
≥Field:
Select if jittering occurs when "Automatic" is selected.
(The picture is coarser.)
≥Frame: Select if small text or fine patterns cannot be seen
clearly when "Automatic" is selected. (The picture is
clearer and finer.)
≥On
≥Off
≥M 1
≥M 2
You cannot select this when recording from an external source
(except from DV equipment connected to this unit's DV IN
terminal). Select the audio on the other equipment.
≥Stereo 1: Records audio (L1, R1).
≥Stereo 2: Records added audio such as narration (L2, R2)
subsequent to original recording.
≥Mix:
Records both Stereo 1 and Stereo 2.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
When recording bilingual broadcast, select the type of audio in
advance from "Bilingual Audio Selection" (➡ above).
Delay time
≥Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
≥Surround (L/R): 0.0/5.0/10.0/15.0 ms
Speaker level
≥Center: –6 dB to +6 dB
(Factory preset : 0dB)
≥Surround (L/R): –6 dB to +6 dB
≥English ≥Deutsch
≥Pycckий ≥Česky
≥Automatic
≥Off
≥On
≥Off
≥Bright ≥Dim
≥Automatic: The display turns dark during play and disappears
when the unit is turned off. It reappears momentarily
if a button is pressed. While using this mode, the
standby power consumption can be reduced.
≥16:9 ≥4:3
≥On ≥Off
≥PAL ≥NTSC
≥Video (with component):
Select when a TV is connected that can receive a composite signal.
≥S Video (with component):
Select when a TV is connected that can receive an S Video signal.
≥RGB 1 (without component):
Select when you have connected a TV that can receive RGB signals.
Select this mode so the TV automatically switches to display
the picture from the unit when you turn the unit on.
≥RGB 2 (without component):
Select when you have connected a TV that can receive RGB
signals. If you would like to switch to display the picture from
the unit only when playback or viewing menus, select this
mode.
≥Video
≥S Video
≥Decoder: When a decoder is connected to decode scrambled
signal (e.g., C+ decoder).
≥Ext:
When the VCR or a digital/satellite receiver is connected.
≥Ext Link 1: When a digital receiver which transmits a special control
signal recordings via the 21-pin Scart cable is connected.
Start and stop timings of recording are controlled by
the control signal.
≥Ext Link 2: When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
(Factory preset : 0dB)
≥Español ≥Polski
≥Magyar
≥Letterbox
RQT8728
37