Honeywell HRG4 Getting Started Manual page 4

DVR Front Panels
HRG4
1
Position Button/Indicator
1 Status Indicators
POWER
STATUS
Tx/Rx
2 IR Receiver
3 Compound Buttons
1/MENU
2/ABC/F1
3/DEF/F2
4/GHI/ESC
5/JKL/EDIT
6/MNO/PLAY
7/PQRS/REC
8/TUV/PTZ
9/WXYZ/PREV
0/A
4 SHIFT
5 Control Buttons
6 USB Port
4
2
Function
Turns green when the DVR is on.
Illuminates when the compound key switches to numeric/letter input mode.
Flickers green when the network connection is functioning normally.
Sensor for IR Remote Controller.
Enter number "1"; Access the main menu.
Enter number "2" or letters "A", "B", "C"; The F1 button when used in a list field will
select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
Enter number "3" or letters "D", "E", "F"; The F2 button is used to cycle through tab
pages. It will also bring up the Channel & OSD Position settings.
Enter number "4" or letters "G", "H", "I"; Exit and back to the previous menu.
Enter number "5" or letters "J", "K", "L"; Delete characters before cursor; Select the
checkbox and ON/OFF switch; Start/stop record clipping in playback.
Enter number "6" or letters "M", "N", "O"; Playback, for direct access to playback
interface.
Enter number "7" or letters "P", "Q", "R", "S"; Manual record, for direct access to
manual record interface; manually enable/disable record.
Enter number "8" or letters "T", "U", "V"; Access to PTZ control interface.
Enter number "9" or letters "W", "X", "Y", "Z"; Multi-camera display in live view.
Enter number "0"; Switch between input methods (upper and lowercase alphabet,
symbols and numeric input).
Switches the compound keys functions from inputting the numeric/letter values to
the functional controls.
Directional buttons: In menu mode, the direction buttons are used to navigate
between different fields and items and select setting parameters. In playback mode,
the Up and Down buttons are used to speed up and slow down record play, and the
Left and Right buttons are used to select the recording 30s forwards or backwards.
In Live View mode, these buttons can be used to cycle through channels.
Enter: The Enter button is used to confirm selection in the Menu mode; or used to
select checkbox fields and ON/OFF switch. In playback mode, it can be used to play
or pause the video. In single-frame play mode, pressing the Enter button advances
the video by a single frame. And in auto sequence live view mode, the buttons can
be used to pause / resume auto sequence.
Connection for a USB mouse or USB flash memory device.
3 3 4 5 6