Getting Started; To Turn The Power On; Setting The Clock; General Control - Pioneer X-SMC55DAB-S Operating Instructions Manual

04

Getting started

Chapter 4:
Getting started

To turn the power on

Press the  STANDBY/ON to turn the power on.
About startup time:
About 30 seconds are required between after the power turns
on until the unit is actually ready to use. The time required for
startup can be reduced by setting the quick start mode to on.
After use:
Press the  STANDBY/ON to enter the power stand-by mode.
Note
• In standby mode, if iPod/iPhone/iPad is connected, the
unit turns charge mode.

Setting the clock

STANDBY/ON

CD USB TUNER
iPod AUDIO IN
NETWORK
EQUALIZER
1 2 3
Press  STANDBY/ON to turn the power on.
1
2 Press CLOCK on the remote control.
"CLOCK" is shown on the main display.
3 Press ENTER.
Press / to set the day, then press ENTER.
4
Press / to set the hour, then press
5
ENTER.
Press / to set the minute, then press
6
ENTER to confirm.
7 Press ENTER.
To confirm the time display:
Press the CLOCK. The time display will appear for about 10
seconds.
To readjust the clock:
Perform "Setting the clock" from step 1.
Note
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
14
En
DISPLAY TUNE+
CLOCK
TIMER
ENTER
SLEEP
MENU
PRESET
TUNE–

General control

Input function

When the INPUT on main unit is pressed, the current function
will change to different mode. Press the INPUT repeatedly to
select desired function.
CD
FAVORITE
M SERVER
FOLDER

Network function

When pressing NETWORK on the remote control, the current
network function will change to different network mode.
Press the NETWORK repeatedly to select desired network
MEMORY
function. The selected function is displayed on the front panel
/PROGRAM
display.
VOLUME

Display brightness control

Press DIMMER to dims the display brightness. The
brightness can be controlled in four steps.

Volume auto setting

If you turn off and on the main unit with the volume set to 31
or higher, the volume starts at 30.

Volume control

Press the VOLUME –/+ on the unit or press VOLUME +/– on
the remote control to increase or decrease the volume.
CAUTION
• The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
DAB FM
I RADIO
I RADIO M SERVER
FAVORITE
USB/
IPOD
IPOD
AUDIO IN