Getting Started - Pioneer X-SMC3-K Operating Instructions Manual

04

Getting started

Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1 Press STANDBY/ON.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup
(page 29).
Use  PLAY to activate Demo Mode or use
2
 STOP to deactivate Demo Mode.
The screen below will automatically appear after the screen in
step 1.
• Demo Mode also can be activated in Auto mode select
(page 29).
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY]
[STOP]
• When Start is selected, the demo mode operates. When
starting up the next time, it will be necessary to set step
3.
• If Cancel is selected, operation will automatically
proceed to step 3.
14
En
Start
Cancel
Use / to select the menu language of this
3
unit, then press ENTER.
Language
English
Français
Deutsch
Nederlands
The setting is done.