Getting Started; Switching On And Setting The Clock; Changing The Clock Format; Automatic Power On Buttons - Pioneer XC-IS22CD Operating Instructions Manual

4

Getting started

Switching on and setting the
clock
You should now have your system installed with everything
connected up and plugged in. After switching on, the first thing
to do is to set the clock. This only needs to be done once (unless
all power to the unit is cut) and will enable you to use the timer
features.
Use the front panel controls to do this.
1 Press STANDBY/ON
2 Press TIMER/CLOCK ADJ.
3 Turn the JOG dial until CLK ADJ (clock adjust)
appears in the display.
If this is the first time you've switched on the unit,
should already be displayed.
4 Press SET.
5 Use the JOG dial to set the hour.
6 Press SET.
7 Use the JOG dial to set the minute.
8 Press SET to finish.
• Press /
DISP RDS
through display options to show the current time. See
Changing displays on page 16 for more on this.
12
En
POWER AMPLIFIER M-IS22
AERO DUCT CONSTRUCTION
STANDBY/ON
STANDBY
CLK ADJ
( on the remote) anytime to cycle
DISP
STEREO CD TUNER DECK XC-IS22CD
CD
ENHANCE
BASS
TUNER

Changing the clock format

You can choose to display the clock in either 12 or 24 hour
formats. The default is 12 hour display format.
1 Switch the system into standby.
2 Press and hold REVERSE MODE for 3 seconds.
3 Turn the JOG dial to select the clock format.
The clock format is shown in the display.
4 Press SET to confirm.
The system returns to standby.

Automatic power on buttons

There are a number of buttons other than
which will switch the unit on.
• , , , and
CD TUNER TAPE LINE 1.2
to that function. (In the case of
tape loaded it will start playing.)
• / touch sensor on the front panel (
OPEN CLOSE
remote) switches the unit on and opens the CD cover.
• 6 switches the unit on and starts playing the last selected
function.
OPEN/ CLOSE
T APE
FOLDER/TRACK
TREBLE
LINE1.2
/
STANDBY ON
switch the unit on directly in
and , if there is a CD/
CD TAPE
0 on the
CD