ViewSonic VT2756-L User Manual page 39

Using the TV Features
Others Menu
OTHERS OTHERS
Blue Back
No Signal Power Off
No Operation Power Off
Usage Monitor
Audio Only Off
TV ID 3
All Reset
:Return :Move :On/Off
MENU MENU ENTER ENTER
Hospitality Menu
1. Press MENU and 9, 9, 3 button on the remote controller to display the Hospitality menu.
2. Press or to select the menu item, then press
selecting a menu item with a submenu ( > > ), press
3. Press MENU to return to the previous menu or press EXIT to exit the menu.
Hospitality Menu
EEPROM Init
Save Config To USB
Load Config From USB
Hospitality
Hospitality Function
Hospitality Menu
Remote Customer Code
Menu Key
Remote Control
VOL Def.
VOL Max
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
USB
Power Input
Menu item
Blue Back
No Signal
Power Off
No Operation
Execute
Power Off
Usage Monitor
Audio Only
TV ID
All Reset
Menu item
EEPROM Init
DO
Save Config To
USB
Load Config From
Off
USB
Hospitality
Hospitality
Function
Menu item
Remote Customer
Code
Enable
Enable
Menu Key
30
100
Remote Control
Enable
Enable
Enable
VOL Def.
Enable
Enable
Enable
VOL Max
Enable
AV
AV
YPbPr
HDMI1/2/3
PC
USB
Power Input
Description
Select to enable the blue background in case
of no signal.
Select to set the TV to automatically turn off in
case of no signal for 10 minutes.
Select to set the TV to automatically turn off if
it is left idle for 10 minutes.
Select to calculate the overall monitor usage.
Output audio from the TV speakers but turn off
the TV display (Off / On).
Set the TV ID for RS232 parameter.
Select to restore the factory default settings.
or to adjust or select the setting. When
or ENTER to enter its submenu.
Clean up the setting to its initial value.
Save the hospitality configuration into USB
drive.
Load the hospitality configuration from USB
drive.
Turn on or off the Hospitality function.
Enter the hospitality sub-menu.
Select the specific remote ID (0, 1, or 2).
Enable or disable the MENU key.
Enable, disable remote or set as IR pass
through
Default volume for each power on.
Maximum available volume
Enable or disable the input source.
Default input source for each power on.
30
Description
Description