System Information; Call Status; Camera Control; Diagnostic Mode - Cisco Telepresence MX200 Quick Start Manual

Settings
To access settings, tap the top left corner of the screen and
tap Settings.
Ringtone and Sound
You can specify:
› Keytones: On or Off. When on, every time you tap a field on the
screen you will hear a sound.
› Ringtone volume.
›
Ringtone: you can select various ringtones, to hear a sample
tap a ringtone.

Camera Control

You can set the whitebalance and exposure to camera. You can
also select Auto for the system to do it itself.

Main Source Selection.

You can select what shall be the main source as a default. You
can still choose another when working with the system.
Display
This menu allows you to set the DVI mode – analogue, digital or
automatic detection.
16 Quickstart Guide | Cisco Telepresence MX Series
Settings
Language
Here you can choose the language to be used.

System Information

This window contains information regarding the systems software
and hardware versions and connections, SIP etc. In the unlikely
event of a system malfunction, this information is typically what
you will be asked by your technical staff.

Call Status

This window provides information on call rate, encryption as
well as parameters for video and audio. In the unlikely event of a
system malfunction, this information is typically what you will be
asked by your technical staff.

Diagnostic Mode

For troubleshooting purposes you may enable additional system
logging. Follow the on-screen instructions. In the unlikely event
of a system malfunction, this information is typically what you will
be asked by your technical staff.

Restart System

Restart your system as required. No settings are lost.
Quickstart Guide | Cisco Telepresence MX Series
17