In observance of European Directive according to EN60745: 2002/96/EC on waste electric and electronic equipment, 2006/66/EC on Model DTW250 batteries and accumulators and waste Work mode : impact tightening of fasteners of the batteries and accumulators and their maximum capacity of the tool...
EC Declaration of Conformity Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
Page 4
15. Dress properly. Do not wear loose clothing or objects, that can make a connection from one jewellery. Keep your hair, clothing, and gloves terminal another. Shorting the battery away from moving parts. Loose clothes, jewellery terminals together may cause burns or a fire. or long hair can be caught in moving parts.
ENC007-7 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all checking function on the tool. instructions and cautionary markings on (1) Installing or removing battery cartridge battery charger, (2) battery, and (3) product...
Page 6
Overloaded: • NOTE: The tool is operated in a manner that causes Use a dry cloth to wipe the dirt off the lens of lamp. • it to draw an abnormally high current. Be careful not to scratch the lens of lamp, or it may In this situation, release the trigger switch on lower the illumination.
Installing or removing socket OPERATION 1. Socket CAUTION: 2. Anvil Always insert the battery cartridge all the way until it • locks in place. If you can see the red part on the upper side of the button, it is not locked completely. Insert it fully until the red part cannot be seen.
The manner of holding the tool or the material of driving position to be fastened will affect the torque. High tensile bolt Operating the tool at low speed will cause a reduction in the fastening torque. (kgf cm) MAINTENANCE 200(2,040) 180(1,836) CAUTION: 160(1,632)
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Sockets • Extension bar • Universal joint •...