Enable Standby - Cisco MX200 User Manual

22 Availability

Enable Standby

Tap the field in the
upper left corner, as
outlined.
Tap Standby,
as outlined.
The screen will turn itself off
after a few seconds. Tap the
screen to wake it up.
About Standby
Your system can be set to Standby
to save electrical energy. You will still
be able to receive calls as usual.
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.