Switching On - Miele KM 6208 Operating And Installation Instructions

Use

Switching on

To switch the cooktop on
To activate a cooking zone
To select the power setting
22
The cooktop must be switched on before any of the zones
can be used.
Do not leave the appliance unattended whilst it is being
used.
^ Touch the "s" sensor.
0 appears in each of the cooking zone displays. If no further
entry is made, the cooktop will switch itself off after a few
seconds for safety reasons.
^ Briefly touch the sensor of the required cooking zone.
A 0 will flash in the display.
Factory default setting
^ Touch the required number on the control panel.
The power setting selected flashes in the display for a few
seconds to start with and then lights up constantly.
Extended setting
(see "Settings")
^ Touch the area between the numbers.
The power setting selected flashes in the display for a few
seconds to start with and then lights up constantly. The
intermediate settings will be represented by an illuminated
dot next to the number.