Fan Motor Removal; Figure 5-10: Vent Ring Assembly; Figure 5-11: Fan Motor Bolts - Miele T 15xx Technical Information

Technical Information
5.9

Fan Motor Removal

1. Open the front service panel; see Section 5.2 or 5.3.
2. Remove the vent-ring assembly (Figure 5-10) and the air duct (on vented
models) or coupler (on condenser models).

Figure 5-10: Vent Ring Assembly

3. Remove the two fan motor bolts (Figure 5-11).

Figure 5-11: Fan Motor Bolts

4. Slide the fan motor toward the front of the appliance, out if the locking track.
5. Lift the fan motor; tilting it slightly upward toward the back to release it from
the belt.
6. Position the fan motor toward the front of the appliance; disconnect the
electrical connection.
Warning!
Before handling the fan motor assembly, ensure that the capacitor is fully
discharged of stored energy.
7. Lift the motor from the appliance to remove.
32
T 15xx Dryers