Removing An Accessible Drive; Installing Accessible Drive Dummy Covers - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Accessible drives and LSD

12.3.2 Removing an accessible drive

Ê Remove all cables from the accessible drive see section
page 395.
Ê Press out on the locking latch to disengage the accessible drive locking bar
(see figure 214).
Ê Fold up the accessible drive locking bar.
Figure 218: Removing the accessible drive
Ê Carefully pull the accessible drive out of its installation bay (1).
Ê Close the locking bar (2) until it locks in place (3).

12.3.3 Installing accessible drive dummy covers

Ê If applicable, install the accessible dummy covers for the desired accessible
drive bay as described in section
on page 192.
306
"Installing accessible drive dummy covers"
Upgrade and Maintenance Manual
"Cabling plans" on
TX2540 M1