Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 86: Securing the 16x 2.5-inch HDD front panel
Ê Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see arrow).
Ê Secure the HDD front panel to the server front with four screws (see circles).
7.2.9.5

Concluding steps

"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
Ê Install HDD / SSD modules or HDD dummy modules into the additional HDD
slots as described in sections
page 147 and
page 151.
I
For detailed information on HDD mounting order, refer to section
inch HDD / SSD configurations" on page
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
"Enabling BitLocker functionality" on page 101
Ê
164
"Installing a 2.5-inch HDD / SSD module" on
"Installing a 2.5-inch HDD / SSD dummy module" on
Upgrade and Maintenance Manual
139.
TX2540 M1
"2.5-