Cisco 7961 User Manual page 12

Changing the ringer sound
There are 25 different ringer sounds to choose from.
1. Press the Settings mode button located on the lower right side of the phone
base.
2. Press the number 2 on the number pad to select the Ring Type option. For the
primary line on the set, remain on the DEFAULT ring line of the phone, otherwise
you will change the ring for other lines on the set.
3. The Ring Type menu list is displayed. To select a ring type, press the Up and
Down Scroll Arrows, located below the LCD screen to highlight the desired ring.
–OR- Using the number pad, press the number that corresponds to the desired
sound to select that ring type.
4. Press the Softkey located directly below the word Play on the LCD screen to
hear the selected ring type.
5. Repeat steps 3-4 until the desired ring type is found.
6. Press the Softkey located directly below the world Select on the LCD screen, in
order to choose the highlighted ring type.
7. Press the Softkey located directly below the word OK on the LCD screen.
8. Press the Softkey located directly below the word Save on the LCD screen to
save the changes.
Martinez Unified School District
10
Phone and Voicemail Users Guide for Cisco 7961 Phones