Modify Device Information - HIKVISION DS-2CD2412F-I Quick Operation Manual

Network Camera·Quick Operation Guide
You can click
the information; you can click
table and hide the network parameter panel on the right
side, or click
 Modify device information
Steps:
1). Select the device to be modified in the device list as shown
in Figure 4-3. The network parameters of the device will be
displayed in the Modify Network Parameters panel on the
right side as shown in Figure 4-4.
2). Edit the modifiable network parameters, e.g. IP address
and port number.
3). Enter the password of the admin account of the device in
the Password field and click
changes.
or on each column heading to order
to show the network parameter panel.
Figure 4-3 Select a device
18
to show the device
to save the