Setting The Network Camera Over The Lan - HIKVISION DS-2CD2412F-I Quick Operation Manual

Network Camera·Quick Operation Guide
4 Setting the Network
Camera over the LAN
Purpose:
To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet with
your PC. Then, install the SADP or iVMS-4200 software to search
and change the IP of network camera.
The SADP and iVMS-4200 software are on the disk in the camera
packet.
Connection of network camera and PC:

Network Cable
Set the IP address of the camera for accessing via LAN.

Steps:
\
Figure 4-1 Wiring over LAN
15
Network Cable