Tools Included; Pre-Assembly; Parts Included - Horizon Fitness Adventure E Owner's Manual

TooLS INCLUDED:

6 mm T-Wrench
5 mm L-Wrench
4 mm T-Wrench
4 mm L-Wrench

PARTS INCLUDED:

1 Console Assembly
2 Console Masts
2 Socket
1 Support Bar
5 Hardware Bags
1 Safety Key
1 Bottle of Silicone Lubricant
(for 2 applications)
1 Power Cord
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place
a protective covering on your floor. Take CAUTION when handling and transporting
this unit. Never open box when it is on its side. Once the banding straps have been
removed, do not lift or transport this unit unless it is fully assembled and in the upright
folded position, with the lock latch secure. Unpack the unit where it will be used. The
enclosed treadmill is equipped with high-pressure shocks and may spring open if
mishandled. Never grab hold of any portion of the incline frame and attempt to lift or
move the treadmill.
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill
from packaging until specified to do so in the assembly instructions. You
may remove the plastic wrap from console masts.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
5