Cisco TelePresence Administrator's Manual page 8

Cisco TelePresence ISDN Link
Contents Introduction
Installation
Connect the cables as described in steps A to D.
CAUTION: Always use the AC-DC adapter shipped with the product.
A
Select one of the three options for line
connection:
• Connect the ISDN cable(s) between the
ISDN BRI port(s) and the ISDN line,
• or connect the ISDN cable between the
ISDN PRI port and the ISDN line,
• or connect the V.35 cable between the
NET port and the external network line.
C
Connect a Category 5 Ethernet cable
between the Video System port and the
Ethernet 1 port on the endpoint.
D14954.01 ISDN Link Administrator Guide IL1.0, June 2012.
Copyright © 2012 Cisco Systems, Inc. All rights reserved.
Getting started Getting started Configuration examples
B
For system configuration:
• Connect a Category 5 Ethernet cable
between the Ethernet port and the LAN
network (if available).
• Connect a RS-232 Serial cable (not
included) between the COM port and the
PC/laptop.
D
Connect the supplied power adapter
between the power connector and an
electrical outlet.
8
Password protection Appendices
Administrator guide
Contact us
www.cisco.com