Scan; Time Search; Zoom - Philips VideoPlus+ DVDR990 Instructions For Use Manual

Scan

Plays the first 10 seconds of each chapter/index on the
disc.
l Press SCAN.
l To continue play at your chosen chapter/index,
press SCAN again or press 2 PLAY.

Time search

The Time Search function allows you to start playing at
any chosen time stamp.
l Select
l Press w (down cursor).
‰ The recorder will now go into pause mode.
‰ A time entry box appears on the screen showing
the elapsed playing time of the current disc.
l Use the digit keys 0-9 to enter the required start
time. Enter hours, minutes and seconds in the box.
‰ Each time an item has been entered, the next
item will be highlighted.
l Press OK to confirm the start time.
‰ The time entry box will disappear and play starts
from the selected time position.
Downloaded From Disc-Player.com Philips Manuals
(Time Search) in the system menu bar.

Zoom

The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
l Select a ZOOM in the system menu bar.
l Press w v (down up cursor) to activate the Zoom
function and select the required zoom factor; 1.33
or 2 or 4.
‰ The recorder will go into pause mode.
‰ The selected zoom factor appears below the
Zoom icon in the system menu bar and 'Press OK
to pan' appears below the system menu bar.
‰ The picture will change accordingly.
l Press OK to confirm the selection.
‰ The panning icons appear on the screen:
w v u t (down up right left cursor) and OK.
l Use the w v u t (down up right left cursor) keys
to pan all over the screen.
l When OK is pressed only the zoomed picture will
be shown on the screen.
l If you wish to zoom at any moment, press
a ZOOM and select the required zoom factor as
described above.
l Press 2 PLAY to exit zoom mode.
p r e s s O K t o p a n