Answer A Ūmi Call - Cisco ?mi telepresence User Manual

2. (Optional) To skip the greeting, select
3. After the three-second onscreen countdown ends, begin recording your message.
4. When you have finished your message, select
5. On the clover, select one of the following:
•
review:
•
record again:
•
adjust camera:
area shown in the message (see
•
don't save:
message recording completely.
•
Select this option when you are happy with your message.
save:
If you see the person's video greeting but don't want to leave a message, end the call by pressing
on the remote while the greeting is playing.
Answer a ūmi call
When a ūmi call comes in, you hear the camera ring. This happens whether your TV is turned on or not.
To answer the ūmi call, do the following:
1. If the TV is off, turn on the TV.
2. If you have ūmi set up to watch TV and use ūmi separately, switch the TV source to the HDMI input
for ūmi. (If you have ūmi set up to watch TV and use ūmi at the same time, you can skip this step.)
3. On the remote, press
38 Calls
See and hear your message before sending.
If you are unhappy with the message, select this option and repeat steps 2 and 3.
Before recording your message again, you can adjust the camera to change the
If you don't want to send a message after all, select this option to cancel video
or .
skip greeting.
stop recording.
Adjust the camera).
or