Using The Ir Remote Control - GE DVSR xU User Manual

DVSR xU User Manual

Using the IR remote control

The IR remote control operation is similar to front panel operation.
Figure 6: Description of the IR remote control
To insert batteries into the IR remote control
1. Remove the battery cover on the remote control.
2. Insert the batteries. Observe the correct battery polarity (+ and -).
3. Replace the battery cover.
To connect the remote control to the DVSR xU:
1. Press the DVSR# button on the remote control.
2. Enter the device ID. The DVSR xU default ID is 1.
Note: See page 31 on how to change the device ID.
3. Press OK. The Status LED will light up on the DVSR xU front panel.
To switch off the IR remote control
1. When IR remote control STATUS LED on the DVSR front panel is lit, press the DVSR# button. The
STATUS LED switches off and the IR control cannot be used to operate the DVSR.
No. Name
A. POWER
B. DVSR#
Alphanumeric
C.
buttons
D. EDIT
E. A
F. INFO
G. ESC
H. PTZ
I. MENU
J.
OK
K. Lens control
L. REC
M. PLAY
N. VOIP/MON
O. PREV
P. SHOT
Q. AUTO
R.
Description
Turn the DVSR on/off.
Enable/Disable the IR remote control
Same as the alphanumeric button on the front
panel
Same as the EDIT button on the front panel
Same as the A button on the front panel
Same as the INFO button on the front panel
Same as the ESC button on the front panel
Same as the PTZ button on the front panel
Same as the MENU button on the front panel
Same as the , ,
Enter button on the front panel
IRIS, FOCUS ZOOM for lens control
Same as the REC button on the front panel
Same as the PLAY button on the front panel
Same as the VOIP button on the front panel
Same as the PREV button on the front panel
Same as the REC-SHOT button on the front panel
Same as the PLAY-AUTO button on the front panel
Reserved
9
, buttons and the