Order Id Change - Casio QT-6600 Reference Manual

3-3-8. Order ID change

MGR C01 10-10-01 12:34
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
Order ID Change
Definition Enable
1.Order1
2.Order2
3.Order3
4.Order4
:
15.Order15
16.Order16
OK?
Note: D D D
4 3 2
QT-6600 Reference Manual
This command is used to change the target printer of order temporarily.
000000
↓
0.00
YES
0103
0202
0203
0104
0000
0000
YES
0.00
D D D D
4 3 2 1
D
1
In case of RS-232C printer,
D D : Terminal ID number which connects with the printer.
4 3
D D : 01 = Printer 1, 02 = Printer 2, 03 = Printer 3
2 1
In case of LAN printer,
D D : Terminal ID number which sends data to the printer.
4 3
D D : 11 ~ 26 = Printer 1 ~ 16
2 1
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select "8. Order ID Change" and press the <YES> key.
4. Select "YES" of the Definition Enable field, and enter an
appropriate ID number of each order printer and press the
<YES> key. Select "YES" of the last line to execute this
command.
R-95