Clerk Detail Memory; Clerk Training; Manager Mode Control - Casio QT-6600 Reference Manual

2-6-2. Clerk detail memory

2-6-3. Clerk training

2-6-4. Manager mode control

Preparation for this function:
Operation for this function:
REG C01 10-10-01 12:34
1 PLU0001
1 PLU0002
1 PLU0003
Operator mistake
3
REG C01 10-10-01 12:34
1 PLU0001
1 PLU0002
1 PLU0003
Operator Code
3
QT-6600 Reference Manual
The terminal can summarize any daily / periodic total memory (such as fixed totalizer,
department, PLU, etc.) clerk by clerk.
After initialization, clerks have 10 detail memories which are assigned to gross, net, and
4 media in drawers. If you want to set more detail memories to clerks, allocate clerk detail
memory and detail link memory at the same time.
Clerk detail memory: File 011 / 111 / 211 / 311 / 411 / 511 / 611
Clerk detail link: File 030
Clerk training can be performed when employing new clerks or retraining clerks.
Training is normally performed during working hours, and the QT-6600 has the following
training functions.
1) It is not necessary to remove one terminal from the system for training purpose during
working hours.
2) Programming options, etc., are controlled exactly the same way as a working clerk.
3) Receipts are different from those normally used. The training receipts are filled with
training filler ("*" default.)
4) Only the REG/REF/REG– mode can be used for training.
There is no actual REG 2 mode on the terminal, but you can control some functions (you
want) under manager control.
1) Set "NO" to any functions you want to disable for CLERKS in the Allowed function 1
~ 5 list in the clerk programming. (See page 76 ~ 78 of the programming manual.)
2) Set the type of operator to "Manager" for the manager. (See page 74 of the programming
manual.)
000001
•10.00
•20.00
•30.00
•60.00
000001
•10.00
•20.00
•30.00
-----
•60.00
1. When the transaction is prohibited, the terminal displays
error message and the clerk calls the manager.
2. The manager enters "2" and press the <REG MODE> key.
R-49