Warning/Error Messages - Yamaha M7CL Owner's Manual

Warning/Error Messages

Message
Scene #xxx is Empty!
Scene #xxx is Protected!
Scene #xxx is Read Only!
xxx Parameters Copied.
xxx Parameters Initialized.
xxx Parameters Pasted.
xxx Parameters Swapped with Copy Buffer. Parameter xxx was exchanged with the contents of the copy buffer.
Cannot Assign!
Cannot Bookmark This Popup!
Cannot Paste to Different Parameter Type!
Cannot Recall to Different Parameter Type! You attempted to recall a library of a different type.
Cannot Recall!
Cannot Select This Channel.
Cannot Store!
Cannot Undo!
Channel Copied.
Channel Initialized.
Channel Moved.
Couldn't Access File.
Couldn't Write File.
Current User Changed. [xxx]
Directory Not Empty!
EFFECT CUE: Turned Off.
External HA connection conflict!
External Power Supply is Cut Off!
File Access is Busy!
File Already Exists!
File Error [xx]!
File Protected!
Illegal Address!
Illegal MAC Address! Cannot Use Ethernet.
Illegal Storage Format!
Internal Power Supply is Cut Off!
Internal Power Supply is Turned On!
KEY IN CUE: Turned Off.
Loading Aborted.
Low Battery!
Memory Error! All Memories Initialized.
Monitor Assignment is Restricted to Max. 8
Sources!
No Controllable Knob.
No Response from External HA.
Nothing to Paste!
Page Bookmarked.
Password Changed.
Power Supply Fan has Malfunctioned!
Processing Aborted.
REMOTE: Data Framing Error!
262
M7CL Owner's Manual
Warning/Error Messages
No data has been stored in the scene you attempted to recall, or the data has been damaged so that
it cannot be recalled.
You attempted to overwrite (store) a protected scene.
You attempted to overwrite (store) a read-only scene.
Parameter xxx was copied to the copy buffer.
Parameter xxx was initialized.
Parameter xxx was pasted from the copy buffer.
You attempted to assign an output channel to DCA.
This popup window cannot be bookmarked.
Paste cannot be performed because you are attempting to paste channel settings of a different type.
Failed to recall a scene memory or library.
You attempted to select a channel that cannot be operated due to your user level or some other reason.
Failed to store a scene memory or library.
You pressed the [UNDO] button when Undo was not available.
Channel settings have been copied.
Channel settings have been initialized.
Channel settings have been moved.
File on the USB storage device could not be accessed for some reason.
File could not be saved from the USB storage device.
Current user was changed to [xxx].
You attempted to delete a directory, but failed because there were files remaining in the directory.
CUE was defeated because you switched from the EFFECT popup window to a different screen.
External HA connection status is different so that External HA data cannot be recalled.
The PW800W power supply connected to the M7CL has stopped operating. Alternatively, some other
problem has occurred. If a malfunction has occurred, please contact your Yamaha dealer.
The following operation has not been performed yet because the USB storage device is being
accessed.
The USB storage device already contains a file/directory with the same name as the one you are
attempting to save, rename, or create.
Internal file access error
Overwriting was not possible because the file on the USB storage device is write-protected.
The IP address or Gateway address setting is invalid.
Communication via the Ethernet connector is not possible because the MAC address setting has been
damaged for some reason. Please contact your Yamaha dealer.
The USB storage device could not be accessed because its format is invalid or unsupported.
The internal power supply has stopped operating. Alternatively, some other problem has occurred. If a
malfunction has occurred, please contact your Yamaha dealer.
The internal power supply has started up normally.
KEY IN CUE was defeated because you switched from the DYNAMICS 1/2 popup window to a differ-
ent screen.
Loading from USB storage device was aborted.
The backup battery voltage is low.
All data has been initialized because the data in internal backup memory has been lost, due to failure
of the backup battery or some other reason. Please contact your Yamaha dealer.
The Monitor Define function allows a maximum of eight sources to be selected, but you attempted to
assign more than this.
Your operation has been ignored because there is no parameter that corresponds to the knob you
operated.
No response from an external AD8HR.
Paste cannot be performed because there is no data in the copy buffer.
The current screen or popup has been bookmarked.
The password has been changed.
The cooling fan of the internal power supply has stopped. If a malfunction has occurred, please con-
tact your Yamaha dealer.
Processing was interrupted.
Invalid signals are being input to the REMOTE connector.
Meaning