iHealth BP5 Quick Start Manual

Wireless blood pressure monitor

Hide thumbs Also See for BP5:

Download this manual See also: Owner's Manual, Instruction Manual

Wireless Blood Pressure Monitor (BP5)

QUICK START GUIDE

Quick Start Guide tells you how to set up your iOS device, connect to Bluetooth, and

measure your blood pressure. Please follow the instruction below to start your

measurement process.

First Time Set Up Instructions

Download the Free iHealth MyVitals App

Prior to first use, download and install "iHealth MyVitals" from the App Store.

Account Set Up and Registration

Follow the on-screen instructions to register and set up your personal account.

Page 1 First Time Set Up Instructions Download the Free iHealth MyVitals App Prior to first use, download and install "iHealth MyVitals" from the App Store. Account Set Up and Registration Follow the on-screen instructions to register and set up your personal account.
Page 2: Measurement Procedures
Turn Bluetooth "On" under the "Settings" menu on the iOS device. • Wait until the model name printed on the monitor, (i.e. "BP5 xxxxxx") and "Not Paired" appear in the Bluetooth menu, and select the model name "BP5 xxxxxx" to pair and connect.
Page 3 Body Posture Sitting During Measurement a. Be seated with your feet flat on the floor without crossing your legs. b. Place your hand, palm-side up, in front of you on a flat surface such as a desk or a table. c.
Page 4 Taking Measurements with Multiple iOS Devices Turn off the Bluetooth of the last used iOS device if the Auto Connect option is enabled in your App, then follow the Set Up Instructions in the Quick Start Guide. Measuring without an iOS Device Enable the Offline Measurement function on the App.