Finisher Related Service Call - Toshiba e-studio600 Service Manual

5.1.12

Finisher related service call

[CB10] Feed motor abnormality
[Procedure 1]
Is second feed motor (M8) rotating in reverse at the fixed timing?
NO Æ
È
YES
Is the shutter securely attached to the shutter upper/lower bars?
NO Æ
È
YES
Turn the feed roller-2 in reverse by hand. Do the shutter upper/lower bars move up and
down?
NO Æ
l
È
YES
Is the shutter closed detecting switch (MS4) working normally?
NO Æ
È
YES
Replace the finisher controller PC board.
[Procedure 2]
Is second feed motor (M8) rotating in reverse at the fixed timing?
NO Æ
È
YES
Is the shutter securely attached to the shutter upper/lower bars?
NO Æ
È
YES
Turn feed roller-2 in reverse by hand. Do the shutter upper/lower bars move up and down?
NO Æ
l
È
YES
Is the shutter open sensor (PI5) working normally?
NO Æ
È
YES
Replace the finisher controller PC board.
March 2005 © TOSHIBA TEC
Replace second feed motor or finisher controller PC board.
Attach it securely.
Fix the mechanism including the shutter upper/lower bars and gears of
the feed roller-2.
Replace the switch.
Replace second feed motor or finisher controller PC board.
Attach it securely.
Fix the mechanism including the shutter upper/lower bars and gears of
the feed roller-2.
Replace the sensor.
5 - 75
e-STUDIO520/600/720/850 TROUBLESHOOTING
5