OPERATOR CONVENIENCES
APO (A
P
UTO
The transceiver switches OFF automatically if no keys
or controls are pressed or adjusted for 30 minutes
(default). One minute before the transceiver switches
OFF, warning beeps sound for a few seconds and
"APO" blinks.
You can select the APO time from OFF (disable), 30
(default), 60, 90, 120, or 180 minutes.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 17
(APO).
3 Press [MENU].
4 Turn the Tuning control to select the APO time from
OFF, 30, 60, 90, 120 or 180 minutes.
5 Press [MENU] to store the setting. Otherwise, press
[PTT] to cancel.
Note:
APO does not function while the transceiver is scanning.
The APO timer starts counting down the time when no key
presses, no control adjustments, and no PC control command
(SP/MIC jack) sequences are detected.
The APO warning beep sounds and "APO" appears 1 minute
before the transceiver turns OFF.
The APO warning beep sounds even if Menu No. 27 (BP)
{page 85} is set to "OFF".
82
OFF)
OWER