Recalling A Memory Channel; Using The Tuning Control; Using A Numeric Keypad (Th-K2At/ Et/ K4At Only) - Kenwood TH-K2AT Instruction Manual

Recalling a Memory Channel

Using the Tuning Control

1 Press [MR] to enter Memory Recall Mode.
• The memory channel last used is recalled.
2 Turn the Tuning control to select your desired
memory channel.
• You cannot recall an empty memory channel.
• To restore VFO Mode, press [VFO].

Using a Numeric Keypad (TH-K2AT/ ET/ K4AT only)

You can also recall a memory channel by entering a
desired memory channel number with the keypad.
1 Press [MR] to enter Memory Recall Mode.
2 Press [#], then enter the channel number using
2 digits.
• For example, to recall channel 49, press [#], [4],
[9].
• You can also enter a memory channel number that
is less than 10 by pressing [#] after entering the
channel number. For example, to recall memory
channel 9, press [#], [9], [#]. You can also press
[#], [0], [9].
46