Busy Channel Lockout; Frequency Step Size - Kenwood TH-K2AT Instruction Manual

5 Press [MENU] to store the setting or [PTT] to cancel.
The transceiver generates the following warning beeps
even if the beep function is turned OFF.
• APO warning beeps {page 82}
• DC voltage error beep {page 115}
• Weather Alert beep {page 55}
• Time-Out Timer warning beep {page 94}
Note: The beep output level is linked to the VOL control position.
B C
USY HANNEL
This function is used in order to prevent transmitting on
a channel or frequency that somebody else is currently
using. When turned ON, an error beep sounds and you
cannot transmit even if you press [PTT].
1 Press [MENU] and turn the Tuning control to select
Menu No. 24 (BCL).
2 Press [MENU] and turn the Tuning control to select
"ON" or "OFF" (default).
3 Press [MENU] to store the setting or [PTT] to cancel.
F S
REQUENCY
Choosing the correct frequency step size is essential in
order to select your exact receive frequency using the
Tuning control. You can select your desired frequency
step size from:
86
L
OCKOUT
S
TEP IZE