System Connections - Kenwood DMF-3020 Instruction Manual

System connections

Make connection as shown below. When connecting
the related system components, refer also to the in-
10
struction manuals of the related components.
Caution: Do not plug in the power lead until all connec-
tions are completed.
Audio cords 2
(accessories)
REC
L
R
DIGITAL input / output jacks
(OPTICAL)
Remove protective caps
from digital input/output
jacks before use.
÷ Be careful not to lose the protective caps.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
MD
Integrated amplifier
REC PLAY
L
R
SYSTEM CONTROL
ƒ
SL 16 XS-8
System control cord 1
(accessories)
LINE
IN PLAY OUT
(VARIABLE)
L
R
DIGITAL
REC PLAY
IN OUT
1 OPT. 2 COAX. COAX.
Remove cap.
Malfunction of microprocessor
If operation is not possible or erroneous display ap-
pears even though all connections have been made
properly, reset the microprocessor referring to "In
case of difficulty".
SYSTEM CONTROL
- + - +
R
System control cord
(CD player optional)
CD player
MD recorder
Optical fiber cable 1
(accessories)
SYSTEM
DIGITAL
CONTROL REC PLAY
IN OUT
1 OPT. 2 COAX. COAX.
OPT.
÷ When connecting the audio cords (cords with pin plugs on each end), insert
the white plugs into the L (Left) jacks and red plugs into the R (Right) jacks.
÷ If the system components are equipped with more than one system control
cord connectors, any one of the connectors can be used.
DMF-5020/DMF3020/MD-203 (En)
ƒ
SL 16 XS-8
DIGITAL
OUTPUT
OPTICAL
Optical fiber cable
(optional)
OPT.
Q
DIGITAL
REC
IN
1 OPT. 2 COAX.
TO WALL AC
OUTLET