Introduction; General Specifications - Motorola HF-SSB MICOM-500E-A G761AA Owner's Manual

The transceiver is a complete unit that includes Micom-2ET, 500watts amplifier , power supply,
e n c l o s e d t o g e t h e r i n a 1 9 " d r a w e r . T h e c o n t r o l h e a d o f t h e r a d i o i s p l a c e d o n t h e d r a w e r ' s f r o n t
panel. The unit includes a movable drawer, which allows to detach the control panel of the radio and
moved up to 5 meters away (cable extension included).
The transmitter amplifier is microprocessor controlled, doing the following functions:
- Adjust amplifier input sensitivity
- Monitor heat, VSWR, and under voltage conditions,
- Setting the power output via the channel power setting (Max, High, Medium and Low)
Power Output:
Band Switching:
Input Voltage:
Cooling:
T/R Switching time: 10mS nominal
Band Switch time:
Protection:

INTRODUCTION

GENERAL SPECIFICATION
1.6-30MHz: 500W PEP and average
Fully Automatic
220VAC-10A /110VAC-20A
Cooling fans
100mS nominal
Input over drive under voltage (adjustable):
Factory default 28+/-3 VDC Amplifier module
Current imbalance VSWR faults Frequency out of
Specified range over current over temperature.
2
HF-SSB Micom – 500E-A