Motorola HF-SSB MICOM-500E-A G761AA Owner's Manual page 10

TRANSMITTER
Output Power
Reduced Power Levels
2
Audio Bandwidth
Audio Bandwidth Ripple
Intermodulation
Spurious Emissions
Carrier Suppression
Undesired Sideband
Suppression
Audio Distortion
1/2 Power Mic. Sensitivity
Hum & Ripple
Inband Noise
TX/RX Switching Time
Tx Tuning Adjustments
RECEIVER
Sensitivity (SINAD) SSB
1/2 Rated Power Sensitivity
2
Selectivity
Image Rejection
IF Rejection
RECEIVER (continued)
2
See Micom 2E spec. for more Bands widths.
3
For tune procedure wait about 2 sec when stepping from one channel to another before transmitting.
500W P.E.P. and average +/-1dB
500W, 400W, 300W, 200W (RSS programmable)
350 to 2700 Hz at – 6dB
3 dB
-31 dB / 500W P.E.P
-60 dB / 500W P.E.P
-50dB / 500W P.E.P
-55dB / 500W P.E.P
2.5%
15 to 125mV (RMS)/600 Ohms
-50 dB
-60 dB (30 Hz BW)
10 msec
3
None
0.5  V for 10 dB SINAD (0.35  V Typical. Note 1)
0.1 - 1.6 MHz with reduced performance
1  V for 2.5W audio at speaker
- 6 dB @ 350 to 2700 Hz
– 60 dB @ -1 kHz; +4 kHz
-80 dB
-85 dB
9
HF-SSB Micom – 500E-A