Side Runners; Universal Tray And Rack With Non-Tip Notches - Miele H 6090 B Operating And Installation Instructions

Table of Contents

Advertisement

Side runners

Side runners for trays, racks and
accessory dishes are fitted on either
side of the oven cavity for shelf levels
³.
The numbers for the shelf levels are
marked on the front frame.
Each level consists of two rails, one
above the other.
– The accessories (e.g. the rack) are
pushed into the oven between the
rails,
– FlexiClip telescopic runners
(depending on model) are fitted on
the lower rail.
If necessary, the side runners can be
removed for cleaning (see "Cleaning
and care").
Universal tray and rack with non-tip
notches
Universal tray:
Rack:
These accessories are inserted into the
oven between the two rails of a side
runner.
Always position the rack as illustrated
above.
The accessories have non-tip safety
notches half way along the short edges
which prevent them from being pulled
right out when they only need to be
pulled partially out.
When pushing the rack back in,
always ensure that the non-tip
notches are at the rear of the oven
(see illustration).
They can then only be taken out of the
oven by raising them upwards and then
pulling them out.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of the side runners and the
rack will automatically slide in above
them.
Features
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H6090b

Table of Contents