XtendLan DVR-1670B User Manual
  1. Manuals
  2. Brands
  3. XtendLan Manuals
  4. DVR
  5. DVR-1670B
  6. User manual

XtendLan DVR-1670B User Manual

Net video digital recorder
Hide thumbs Also See for DVR-1670B:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual of DVR-1670B
DVR-1670B
Net Video Digital Recorder
User's Guide
Page 1

Advertisement

Table of Contents
loading

Related Manuals for XtendLan DVR-1670B

Summary of Contents for XtendLan DVR-1670B

  • Page 1 User Manual of DVR-1670B DVR-1670B Net Video Digital Recorder User’s Guide Page 1...

  • Page 2: Table Of Contents

    User Manual of DVR-1670B Index Chapter1 Product Introduction ....................4 Summary........................4 Features ........................4 Chapter2 Installation ........................6 Checking the DVR and Its Accessories ..............6 HDD Installation.......................6 Rear Panel Description .....................7 External Alarm In/Out Connection ................8 Chapter3 Operational Instructions....................9 Front Panel ........................9 IR Controller ......................11 Menu Description....................13...
  • Page 3 User Manual of DVR-1670B 5.18 Transaction Information..................80 Chapter6 Utilities........................84 Save Parameters ......................84 Restore Parameters....................84 Upgrade........................85 Hard Disk Management ..................86 Clear Alarm Out......................86 Reboot ........................86 Power Off........................86 View Log.........................86 System Information....................89 Chapter7 Firmware Upgrade ....................90 FTP Server Setup ....................90 Upgrade Mode ......................93 Appendix A HDD Capacity Calculation ..................94...

  • Page 4: Chapter1 Product Introduction

    TCP/IP. The firmware is burned in the flash, more stable and reliable. DVR-1670B device has both the features of digital video recorder (DVR) and digital video server (DVS). It can work stand alone, also be used to build a powerful surveillance network, widely used in bank, telecommunication, transportation, factories, warehouse, irrigation, etc.
  • Page 5 User Manual of DVR-1670B Preview and playback Support analog moniotor and VGA output. Support multiple preview modes. Support sensitive area mask. Support camera spiteful block alarm. Support one channel play back by files or by time. Display local record status.

  • Page 6: Chapter2 Installation

    User Manual of DVR-1670B Chapter2 Installation Warning: Before you install the DVR, please make sure the power of DVR is switched off. Checking the DVR and Its Accessories When you get the product, check that all the items are included in your product package.

  • Page 7: Rear Panel Description

    User Manual of DVR-1670B Rear Panel Description Notice: Please refer to real product for different model. • Œ Ž • • ‘ ’ “ DVR-1670B Rear Panel Index Physical Interface Description Standard BNC. Video Input Connect monitor, output video and menu.

  • Page 8: External Alarm In/Out Connection

    User Manual of DVR-1670B External Alarm In/Out Connection Alarm input port: G (GND): Conenct the GND of sensor. 1~16: Alarm input, support normal open/normal close. 0: Reserved. Alarm output: 1G~4G: 4 relay output. Alarm output connection Please note the usage of jumper JJ1. If you use DC, either of connections is OK. We suggest you to use those DC under 12V, 1A.

  • Page 9: Chapter3 Operational Instructions

    User Manual of DVR-1670B Chapter3 Operational Instructions Front Panel Œ • Ž • • Index Type Name Description State READY DVR is ready. Lamps STATUS Green means you can use IR remote control. ALARM Red means there is alarm. RECORD Twinkle in red means reading or writing HDD.
  • Page 10 User Manual of DVR-1670B 2. 【SHOT】in PTZ control (adjust preset). 1. Enter into PTZ control mode; 2. 【IRIS-】in PTZ control.. SHIFT Multi screen preview switch; Switch menu mode into preview; 【FOCUS-】in PTZ control. Input switch (number, lower case, upper case and symbol);...

  • Page 11: Ir Controller

    User Manual of DVR-1670B IR Controller Index Name Description POWER Turnoff device. Enable/Disable IR remote control Numeric Keys Same as numeric keys of front panel. EDIT Same as EDIT key of front panel. Same as A key of front panel.
  • Page 12 User Manual of DVR-1670B Reserved Same as【F1】key of front panel. IRIS, FOCUS ZOOM for lens Lens control control. Same as【F2】key of front panel. Loading the batteries into the IR controller Remove the battery cover. Insert the battery. Please take care that the poles (+ and -) are correctly positioned.

  • Page 13: Menu Description

    User Manual of DVR-1670B Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Camera name and position setup Unit name Adjust Brightness, Contrast, Hue Device ID and Saturation Require password OSD Display mode, position and Screen saver OSD format setup...

  • Page 14: Menu Operation

    User Manual of DVR-1670B Restore parameters Upgrade firmware Text input mode HDD management Transaction ATM IP address Utilities Clear alarm output ATM type Reboot Text information Power off View log System information 3.3.2 Menu Operation How to enter into menu mode Press【MENU】key to enter into DVR main menu.
  • Page 15 User Manual of DVR-1670B 【ENTER】key to enter into the secondary menu. For example, move the “Active Frame” to “Image” icon, press 【ENTER】to enter into the secondary menu as following: Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame”...
  • Page 16 User Manual of DVR-1670B “Policy” button to enter into sub-menu. Press【Confirm】to save parameters and return to parent menu. Press 【 Cancel】 button to cancel and return to parent menu. The button in grey means it can be operated only after it is enabled.

  • Page 17: Character Input

    User Manual of DVR-1670B Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status is appeared: Here it means you can press numeric keys to input digital number.

  • Page 18: Chapter4 Basic Operation Guide

    User Manual of DVR-1670B Chapter4 Basic Operation Guide Power on Note: Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface. Otherwise, you can not see graphic user interface and can not operate.
  • Page 19 User Manual of DVR-1670B Press【A】key to display or hide the camera status bar. Camera record status is following: Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green Real time recording Blue Motion detect recording...
  • Page 20 User Manual of DVR-1670B Camera alarm status is following: Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&External alarm Green No alarm Blue Motion alarm External alarm Press numeric keys to switch over individual camera preview. If DVR has less than 10 channels, press one numeric key to switch corresponding channel.

  • Page 21: User Name And Password

    User Manual of DVR-1670B User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified. The administrator can create 15 users and define their user rights.
  • Page 22 User Manual of DVR-1670B Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using【à】/【ß】keys. Press【ENTER】 key to enter into following password menu: Step 3: Input new password Press【EDIT】key to enter into edit box. You can use numeric keys to input new password.

  • Page 23: Ptz Control

    User Manual of DVR-1670B repeat step 3 to modify again. PTZ Control Note: The user must have the “PTZ control” right. PTZ control interface In preview mode, press【PTZ】key, in the login dialog, select one user name and input the correct password, you can enter into PTZ control interface.
  • Page 24 User Manual of DVR-1670B Direction control keys: 【↑】,【↓】,【←】,【→】; 【ZOOM+】,【ZOOM-】; ZOOM control keys: 【FOCUS+】,【FOCUS-】; FOCUS control keys: 【IRIS+】,【IRIS-】; IRIS control keys: 【REC/SHOT】; Adjust preset keys: 【PLAY/AUTO】; Auto control key: 【WIPER/MENU】; Wiper control key: 【LIGHT/F1】; Light control key: Auxiliary device control key:【AUX/F2】...

  • Page 25: Manual Record

    User Manual of DVR-1670B Manual Record Note: The user must have the corresponding right, DVR has HDD and HDD is formatted already. Manual record In preview mode, press【REC】key, in the pop-up login dialog, select the name and input the correct password, you can enter into the “Manual Record” interface.

  • Page 26: Playback

    User Manual of DVR-1670B Press【ESC】key to enter into preview mode. Press【MENU】key to enter into main menu. Press【PLAY】key to enter into playback menu. Press【PTZ】key to enter into PTZ control mode. Playback Note: The user must have “Playback” right. Playback interface In preview mode, press【PLAY】key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback”...
  • Page 27 User Manual of DVR-1670B box, use numeric keys to input the detail time. Card Number: DVR can get text number through RS-232 or network port. The text is sent from devices such as ATM machine, POS machine or others. DVR can overlay the text on the real time image and record.
  • Page 28 User Manual of DVR-1670B If the matched files are more than 8, you can use “Page No.” to select page (use numeric keys or【↑】 【↓】keys to select page). In the file list box, use【↑】 【↓】keys to move the scroll bar to the file, press【ENTER】key to playback the file.
  • Page 29 User Manual of DVR-1670B Playback At the bottom of image, there is an information bar and the following information is included: Volume, Play Progress, Play Speed, Played Time and File Total Time. Display/Hide information bar: 【MENU】 Open/Close sound: 【PLAY】 Adjust play progress: 【←】(Backward),【→】(Forward). The unit is “%”.
  • Page 30 User Manual of DVR-1670B In playback interface, press【ESC】key to enter into preview mode. In playback interface, press 【MENU】 key to enter into main menu, press 【REC】 key to enter into manual record, and press【PTZ】key to enter into PTZ control mode.

  • Page 31: Backup Recorded Files

    User Manual of DVR-1670B Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback interface, you can backup the recorded files. In the preview mode, press【PLAY】key, in the login dialog, select username and input the correct password, you can enter into the playback interface.
  • Page 32 User Manual of DVR-1670B Step 2: Select the files that you want to backup In the file list box, use 【 ↑】 or 【 ↓】 keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press 【 EDIT】 key to select it. The symbol “ü” is the selection tag. You can use the same method to select other files you want to backup.

  • Page 33: Shut Down Dvr

    User Manual of DVR-1670B Note: The backup function is effective when two channels are playback synchronously. In such case, each channel can backup 30 segments so 60 segments can be backup for two channels. Playback the video segment You can use our file player software to playback the video segment in PC. You can find the player software in attached CD.
  • Page 34 User Manual of DVR-1670B If DVR is shut down correctly, the【POWER】lamp is in red. Note: When message of “Shut down…” is appeared, please do not press【POWER】key any more, otherwise, DVR can not be shut down. Shut down DVR abnormally Use the power switch of real panel When DVR is run, if you switch off the power, the HDD in DVR will be damaged.

  • Page 35: Chapter5 Parameters Setup Guide

    User Manual of DVR-1670B Chapter5 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters take into effective. Other parameters do not need to reboot.
  • Page 36 User Manual of DVR-1670B Move “Active Frame” to “User” icon, press【ENTER】key to enter into “User Management” menu. In the user name list box, only “admin” is existed. You can use 【 →】 key, move “Active Frame” to password edit box, and press【EDIT】key to enter into edit status. Press numeric keys to input the new password.

  • Page 37: Add And Delete User

    User Manual of DVR-1670B Add and Delete User Enter into “User Management” interface. Add user The steps are following: Step 1: Enter into “User Management” menu Please refer to chapter 5.1 Step 2: Add new user name In the “User Management” menu, move “Active Frame” to “Add” button and press 【ENTER】...
  • Page 38 User Manual of DVR-1670B name, then use【à】key to the password edit box. Press【EDIT】key to enter into edit box, use numeric keys to input the new password. Step 3: Setup the rights for new user The new added user has not any operational rights. You must setup rights for him.
  • Page 39 User Manual of DVR-1670B User rights description “Local Rights”: Local rights are for local operation, such as the operation using front panel, IR controller and RS-485 keyboard. PTZ control: Locally control PTZ; Record: Manual start/stop recording; Playback: Local playback and backup the recorded files;...
  • Page 40 User Manual of DVR-1670B Delete user In “User Management” interface, you can use 【 á】 【 â】 keys to select one user, then use 【 à】 , move “Active Frame” to “Del” button, press【ENTER】, in the pop-up confirmation dialog, press “Confirm”...

  • Page 41: Unit Name And Device Id

    User Manual of DVR-1670B Unit Name and Device ID Unit name In the “Display” menu: There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press【EDIT】key to enter into edit status, you can modify the unit name.

  • Page 42: Video Output Standard And Vga Setup

    User Manual of DVR-1670B Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output. You can modify video output standard to match video input.
  • Page 43 User Manual of DVR-1670B name display position, etc. System Time In “Display” menu, you can setup DVR system date and time. Display System Time You can setup display properties for each camera, including display status, position and format. Of course, you can copy the properties of one camera to all cameras.
  • Page 44 User Manual of DVR-1670B “OSD”, press 【ENTER】to enter into setup image, you can find there are 22*18 (for NTSC, 22*15) small panes, and OSD position is in red. You can use【â】 【á】 【à】 【ß】keys to move the OSD position. Press【EDIT】key to select OSD format. There are following OSD formats:...
  • Page 45 User Manual of DVR-1670B Step 2: Move “Active Frame” to camera name edit box, press【EDIT】key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4). The camera name can support 32 characters.

  • Page 46: Video Parameters Setup

    User Manual of DVR-1670B Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters such as brightenss, saturation, contrast and hue, etc. You can setup the camera individually, and also you can copy the video parameters of one camera to any other cameras.

  • Page 47: Mask Area Setup

    User Manual of DVR-1670B Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup” menu: Step 2: Select one camera: You can use【á】 【â】keys to select one camera.
  • Page 48 User Manual of DVR-1670B Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for NTSC), you can use【↑】 【↓】 【→】 【←】keys to move the yellow pane to your hope position and press【EDIT】key, the yellow pane will be turned into red, then you can use【↑】...

  • Page 49: View Tampering Alarm

    User Manual of DVR-1670B View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1: Enter into “Image Setup” memu: Step 2: Select camera: Please use【á】 【â】keys to select one camera.
  • Page 50 User Manual of DVR-1670B Step 6: Alarm schedule setup: When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy the schedule of one day to other days.

  • Page 51: Video Loss Alarm

    User Manual of DVR-1670B Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【á】...
  • Page 52 User Manual of DVR-1670B happened in the schedule, DVR will response. Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters into effective. Step 5: Setup alarm policy: You can select one or more response solutions, including “On Screen Warning”, “Audible Warning”, “Upload to Center”...

  • Page 53: Motion Detection Alarm

    User Manual of DVR-1670B 5.10 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【á】 【â】key to select one camera. Step 3: Select motion detection sensitivity: On the right side of “Motion Det. Level” item, there is a list box.
  • Page 54 User Manual of DVR-1670B The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7).
  • Page 55 User Manual of DVR-1670B 【↑】: Up shrink red pane; 【PTZ】: Set whole screen as motion area; 【A】: Clear all motion areas; 【ENTER】: Save and return “Image Setup” menu; 【ESC】: Cancel setup and return “Image Setup” menu; The motion detection area is displayed as following: Step 5: Motion alarm policy: Move “Active Frame”...
  • Page 56 User Manual of DVR-1670B or more record channels. Please use【ENTER】or【EDIT】key to enable the flag into “ü”. Note: In order to make the cameras start recording, in “Recording” menu, you must enable recording schedule and set “Rec Type” as “Motion Detection” or “Motion | Alarm”. Please refer to chapter 5.12 for recording setup.

  • Page 57: Preview Properties

    User Manual of DVR-1670B 5.11 Preview Properties In “Preview” menu, you can setup preview mode, screen switch time, enable or disable audio preview and preview layout. Step 1: Enter into “Preview” menu: In the main menu, move “Active Frame” to “Preview”...
  • Page 58 User Manual of DVR-1670B Preview layout setup: There is a square frame divided into many windows. If you select “4 Screen”preview mode, this frame is divided into 4 windows. Each window represents one camera. You can move “Active Frame” among the windows. There is one bar under the square to display the preview order of all cameras.

  • Page 59: Recording Setup

    User Manual of DVR-1670B 5.12 Recording Setup In main menu, there is an icon named “Recording”. You can enter into recording menu as following: “Recording” menu description: If HD Full: There are two options: “Overwrite” and “Stop recording”. If you select “Overwrite”...
  • Page 60 User Manual of DVR-1670B If you select variable bit rate, DVR will adjust the actual bit rate according to the video movement. When there is not much movement, DVR will use low bit rate, while there is much movement, DVR will use high bit rate. In this case, DVR can save HDD usage and network bandwidth.
  • Page 61 User Manual of DVR-1670B Schedule: When you enable recording function, you can setup recording schedule. Note: When the camera’s recording schedule is modified, you must reboot DVR to make it into effective. All day recording setup: Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“ü”...
  • Page 62 User Manual of DVR-1670B and return main menu. None all day recording setup Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“ü” flag), press “Schedule” button to enter into recording schedule menu. Step 2: Select ond day and disable all day recording option For “Day”...
  • Page 63 User Manual of DVR-1670B Note: If record type is “Motion Detect” or other related types, you must setup “Motion Detection” in order to trigger motion recording (refer to chapter 5.10). If record type is “Alarm” or other related types, you must setup “Alarms” in order to trigger alarm recording (refer to chapter 5.13).

  • Page 64: External Alarm Input And Relay Output

    User Manual of DVR-1670B 5.13 External Alarm Input and Relay Output For 4-channel DVR, there are 4 external alarm input and 2 relay output. For 8-channel DVR, there are 8 external alarm input and 4 relay output. For 16-channel DVR, there are 16 external alarm input and 4 relay output.
  • Page 65 User Manual of DVR-1670B Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input. In the sub menu, you can use 【ENTER】or【EDIT】key to enable record channel. “×” means disable and “ü means enable.
  • Page 66 User Manual of DVR-1670B First select one camera, then select one of following PTZ linkage: Preset: Set the flag as “ü” to enable preset, in the preset number edit box and input one preset number that has been setup already. Please refer to chapter 5.15 for preset setup.
  • Page 67 User Manual of DVR-1670B you press “Clear Alarm” button in “Utilities” menu. So the actual alarm output time is made up of alarm input time and this delay time. Step 3: Enter into alarm out schedule You can set the schedule to make alarm output into effective. Move “Active Frame” to “Schedule”...

  • Page 68: Network Parameters

    User Manual of DVR-1670B 5.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note: If any network parameter is modified, you must save and reboot DVR to make it into effective. In main menu, move “Active Frame” to “Network” icon and press【ENTER】, you can enter into “Network”...
  • Page 69 User Manual of DVR-1670B number, DVR current IP to that fixed IP address. We call that fixed Internet IP as DNS IP. The DNS server with that fixed Internet IP can receive DVR information and used to resolve DVR dynamic IP.

  • Page 70: Ptz

    User Manual of DVR-1670B “Network” menu. 5.15 PTZ There is one RS-485 port at DVR rear panel used for PTZ control. You can setup RS-485 parameters to match your PTZ protocol. In main menu, move “Active Frame” to PTZ icon and press【ENTER】key, you can enter into PTZ menu as following:...
  • Page 71 User Manual of DVR-1670B Preset setup: Preset is using one number to represent the camera’s position, zoom, focus and iris. Move “Active Frame” to “Setup” button on the right side of “Preset” item, press【ENTER】 key to enter into preset setup menu. You can save 128 preset numbers. Please make sure the PTZ support preset function before you setup preset.
  • Page 72 User Manual of DVR-1670B button, you can delete this preset number. After deleting, press “Return” button to “PTZ” menu. In “PTZ” menu, press “Confirm” button to save all modification. Please make sure the PTZ you are using can support preset function.
  • Page 73 User Manual of DVR-1670B Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press【ENTER】to save the operation track and return “Cruise” setup menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button.

  • Page 74: Rs232 Setup

    User Manual of DVR-1670B 5.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss【ENTER】key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
  • Page 75 User Manual of DVR-1670B Mask: Only used when work mode is “PPP”. Remote IP and Local IP are in the same sub net. Username, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN.
  • Page 76 User Manual of DVR-1670B Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port. You can use HyperTerminal or NetTerm to setup modem: AT&F ---- Retore default parameters (Generally, Modem is hard flow control)
  • Page 77 User Manual of DVR-1670B Page 77...
  • Page 78 User Manual of DVR-1670B Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup.

  • Page 79: Exceptions

    User Manual of DVR-1670B 5.17 Exceptions The exceptions can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL differ. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 80: Transaction Information

    User Manual of DVR-1670B 5.18 Transaction Information The DVR can actively obtain or passively receive the credit card number from ATM machine linked through network or serial port, and credit card number can be overlay on live video, recorded and playback. The following description indicates how to carry out relevant parameter setting according to different links to ATM machine.
  • Page 81 User Manual of DVR-1670B Start & end position and length of transaction type Transaction type and code When the ATM machine is sending transaction information to bank center, DVR will capture the data package through network, and analyse the data according to the format. Then DVR will overlay the correspond text on live video.
  • Page 82 User Manual of DVR-1670B In the case, you must set the RS-232 of DVR as transparent channel mode as following: A software must be run in the ATM machine, and send the credit card number, transaction code to DVR through RS-232 port.
  • Page 83 User Manual of DVR-1670B In the case, you must set the RS-232 of DVR as transparent channel mode as following: Also, a software must be run in ATM machine, and send command to DVR through RS-232 port based on special communication protocol.

  • Page 84: Chapter6 Utilities

    User Manual of DVR-1670B Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: Save Parameters Save factory default parameters into FLASH memory. You can reboot DVR to make them into effective.

  • Page 85: Upgrade

    User Manual of DVR-1670B Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or “USB” upgrade mode. If you select “FTP” mode, you will enter into “FTP Upgrade” menu: Input the ftp server IP and press【ENTER】key.

  • Page 86: Hard Disk Management

    User Manual of DVR-1670B Hard Disk Management Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally.
  • Page 87 User Manual of DVR-1670B If you want to view the log based on default option, just press 【 ENTER】 key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date). By Type To view log information of the assigned type.
  • Page 88 User Manual of DVR-1670B Step 3: Move “Active Frame” to “Search Log” button, press 【 ENTER】 key to start searching. Step 4: When searching is finished, DVR will list all matched alarm information. In the list box, the information includes: Index, Occur Time, Major Type, Minor Type, Panel User, Net User, Host Address, Para.

  • Page 89: System Information

    User Manual of DVR-1670B System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Page 89...

  • Page 90: Chapter7 Firmware Upgrade

    User Manual of DVR-1670B Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. There are two cases that you need to upgrade DVR firmware. One is update old firmware.
  • Page 91 User Manual of DVR-1670B Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog, input password “target” in “New Password” and “Verify Password”...
  • Page 92 User Manual of DVR-1670B 7. Next time, you need not setup again, just double click and open “wftpd32.exe” to upgrade the DVR/DVS firmware. Page 92...

  • Page 93: Upgrade Mode

    User Manual of DVR-1670B Upgrade Mode Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software user manual for detail information. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need one host PC to run FTP server software and place firmware file (digicap), and make sure DVR and PC are in the same sub net.

  • Page 94: Appendix Ahdd Capacity Calculation

    User Manual of DVR-1670B Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for every hour, unit Mbyte.

  • Page 95: Appendix Bdvr Connect Cable Definition

    User Manual of DVR-1670B Appendix B DVR Connect Cable Definition 1 UTP network connect cable made method Material and tool One twist cable (8 pin, the length can be defined as to the actual demand, but must be within 100m), 2 standard RJ45 head, one tool for RJ45.

  • Page 96: Connect Cable Made Method

    User Manual of DVR-1670B The corresponding relationship of cross cable 2 RS-232 connect cable made method DVR-1670B has standard DB9 RS-232 interface, like PC COM port. Pin definition I means DVR input and O means DVR output. Pin index Name...

  • Page 97: Appendix C Specifications

    User Manual of DVR-1670B Appendix C Specifications Model name DVR-470B DVR-870B DVR-1670B Video H.264 compression Preview PAL: 704*576 (4CIF), NTSC: 704*480 (4CIF) resolution Playback CIF/QCIF resolution Video input Video input BNC (Electrical Level: 1.0Vp-p, resistance: 75Ω) interface Video output 1 channel, BNC (Electrical Level: 1.0Vp-p, resistance: 75Ω)
  • Page 98 User Manual of DVR-1670B Relay output Power supply 100~240VAC, 6.3A, 50~60 HZ Power 20--42W (without HDD) consumption Working -10℃--＋55℃ temperature Working 10％--90％ humidity Size 14.25 inch standard (440mm*390mm*70mm) ≤8Kg (without HDD and CD-R/W) Weight PAL: 176*144(QCIF), 352*288(CIF), 704*288(2CIF), 528*384(DCIF), 704*576(4CIF);...

  • Page 99: Appendix D List Of Recommended Dvr Peripherals

    User Manual of DVR-1670B Appendix D List of Recommended DVR Peripherals USB DVD-R/W: LG GSA-E10L 2. BENQ EW164B USB CD-R/W: 1. BENQ external 5232WI-ok2 2. ASUS CRW-4824A + USB Convertor case 3. SONY CD-R/RW CRX230AD + Convertor cable 4. SONY CD-R/RW CRX225E + Convertor cable 5.
  • Page 100 User Manual of DVR-1670B West Digital: 1. WD Caviar WD400BB 2. WD Caviar WD800BB 3. WD Caviar WD1200BB 4. WD Caviar WD2000BB 5. WD Caviar WD2500BB 6. WD Caviar SE WD1600BB 7. WD Caviar SE WD2000JB 8. WD Caviar SE WD2500JB 9.

  • Page 101: Appendix E Quick Search Function Table

    User Manual of DVR-1670B Appendix E Quick Search Function Table Type Name Description Index User Create and delete users. System has one default management administrator. The administrator can create 15 users Safety and define their rights. function Password Modify password.
  • Page 102 User Manual of DVR-1670B Remote Remote record real time stream. record Remote Remote playback the recorded files in DVR playback Download Download recorded files in DVR. Remote Remote upgrade firmware. upgrade Transparent Remote control serial device connected with serial 5.16 channel port of DVR.

  • Page 103: Appendix F Troubleshooting

    User Manual of DVR-1670B Appendix F Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, Power cable is broken. “POWER” light in front Panel does not turn on, and fan Power supply is broken. does not work.
  • Page 104 User Manual of DVR-1670B Old player SDK (playm4.dll) Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification. If the circuit board is wet, dust on circuit board can cause a short circuit. The circuit board, plug and socket, housing fan and housing should be cleaned by brushing regularly.

  • Page 105: Appendix G Product Service

    User Manual of DVR-1670B Appendix G Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for the damage caused by non personal acts).

  • Page 106: Appendix H Customer Information Card

    User Manual of DVR-1670B Appendix H Customer Information Card User’s Mr./Mrs. Name Company Name Post Address Postcode Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor Page 106...
  • Page 107 User Manual of DVR-1670B Suggestions: Page 107...

Table of Contents