Specifications - Kenwood SW-305 Instruction Manual

Specifications

Type .................................................... Subwoofer system with built-in amplifier
[Amplifier]
Rated Output Power ........................ 150 W RMS 30 Hz ~ 200 Hz, 4
Phase Switching ............................... NORMAL, REVERSE
Input Sensitivity & Input Impedance
RCA-type pin-plug jack ................. 100 mV /12 k
Push-type terminals ...................... 1.7 V /15 k
[Speaker]
Enclosure ........................................... Bass-Reflex, Floor Standing Type
Speaker Unit ..................................... 250 mm(10") Cone type
Nominal Impedance ......................... 4
[General]
Rated Power Consumption ............ 50 W
Dimensions ........................................ Width
Net Weight ........................................ 15.2 kg (33.5 lb)
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be
changed without notice.
Note
Note Note
¶
Sufficient performance may not be exhibited at extremely cold locations (where water freezes).
(Magnetically shielded)
200 mV /12 k (MONO Input)
: 294 mm (11-9/16")
Height : 457 mm (18")
Depth : 415 mm (16-5/16")
SW-505D (EN)
23